NEWS CENTER
Just a phone call we will provide suitable products, satisfactory service!
Service hotline
Turning parameters and milling parameters
Turning parameters
P
VC=150(120-200)M/MIN 495(390-660)SFM
AP=0.90(0.50-1.20)MM .035(.020-.047)IN
F=0.15(0.10-0.22)MM/REV .006(.004-.009)IPR
M
VC=170(120-250)M/MIN 560(490-820)SFM
AP=1.80(0.50-3.80)MM .071(.020-.150)IN
F=0.25(0.12-0.45)MM/REV .010(.005-.018)IPR
K
VC=180(100-280)M/MIN 595(330-920)SFM
AP=0.90(0.50-1.20)MM .035(.020-.047)IN
F=0.15(0.10-0.22)MM/REV .006(.004-.009)IPR
Milling parameters
P
VC=150(120-200)M/MIN 495(390-660)SFM
FZ=0.25(0.10-0.35)MM .010(.004-.014)IN
M
VC=140(120-160)M/MIN 460(394-520)SFM
FZ=0.2(0.10-0.30)MM .008(.004-.012)IN
K
VC=180(150-200)M/MIN 590(490-660)SFM
FZ=0.2(0.30-1.50)MM .008(.004-.012)IN
Previous article:How to overcome deformation? CNC turning tips for machining thin-walled parts
Next article:没有了!
Copyright © 2018-2020 All Rights Reserved.
Address:06th Floor, MD Complex Tower, 68th Nguyen Co Thach Street, Cau Dien Ward, Nam Tu Liem District, Hanoi, Viet Nam.
TEL:0928 566 998
Email:[email protected]